When

From SpaceElevatorWiki.com
Jump to: navigation, search
Title: When?

[Cover Img]

About:

  • Author: Ben Shelef
  • Created: July 6, 2008
  • Modified: July 6, 2008

Tags:

  • This article is not peer reviewed
  • Discipline(s): Engineering
  • This article is a FAQ
  • This article is about CNT technology
  • This article is static

Contents

 

Abstract

This article answers a (very) frequently answered question - "when will the space elevator be built?". Predictions being what they are, we're not circling dates on a calendar just yet - rather, we identify the major steps that have to be taken, estimate how long they will take, and track the current state of the art in relation to them. Spoiler: The short answer, btw, is that we think we can start building the first elevator by 2020, and have it operational by 2025. That's in 15 years. This article follows closely the information in http://www.spaceward.org/elevator-howClose.

Are we there yet?

(thumbnail)
1960 article by Yuri Artsutanov proposing the Space Elevator. (Thanks to Roger Gilbertson) - PDF

Technically speaking, building the Space Elevator requires two major achievements: a tether which is at least 30 GPa-cc/g strong (see below), and a long-range power beaming system in the Mega-Watt range. We define phase 0 as demonstrating these two technological building blocks, and we plan to do this by the year 2010, including a 10 GPa-cc/g CNT tether, and a multi-kWatt km-scale power beaming demonstration.

With these benchmarks demonstrated, we plan to pursue a 5-year development phase (phase 1) of full-performance components, followed by a 5-year system development effort (phase 2). This puts the beginning of construction (phase 3) around the year 2020, and start of operation by 2025.

If, that is, the technology is the pacing factor. The world is not lacking in great inventions that can have tramendous positive impact on our lives, yet are gathering dust on a shelve because of any of a hundred reasons. We'll do our best to make sure that we do not become one of these, but the timeline we give is merely for the earliest that the Space Elevator *can* be built.

  • The cost of phase 0 is well under 5 million dollars, and some of it is being achieved by the Elevator:2010 challenge project for significantly less than that. Based on current results and publications, we believe the objectives are very much achievable. (The results of phase 0, btw, are very much commercially viable, and we plan to use them to fund phase 1)
  • Phase 1 is the highest-risk portion of the development plan, since it aims to achieve the largest advance in performance. We estimate the cost of this researcg phase at under 200 million dollars, and it will result in removing any doubt about the feasibility of the SE project - by far the most important milestone in the plan.
  • Phase 2 is the main design phase - 5 years to design every nut and bolt on the anchor station, the climbers, the deployment systems... This is an aerospace design phase not much different than designing a new type of airplane or space capsule. The cost of this phase is much higher, and it will be performed by subcontracting to major aerospace companies.
  • Phase 3 is a direct continuation of phase 2, including the building of the ground infrastructure, the full length ribbon, the power beaming station...

All in all, we estimate the entire program to cost less the $10B - a small amount compared to the development and construction costs of programs like the Space Shuttle, the ISS, or even "regular" rockets.

The tether

(thumbnail)
House Tether in 2006 Space Elevator .

By far, the tallest hurdle we have to clear on the way to building the Space Elevator is the development of a suitable tether material. The main metric we are concerned about is the strength-to-weight ratio of the material, also known as its specific strength, or tenacity. Steel wire, for example, can be made very strong, but it is also very heavy, so is not a good candidate. Spectra 2000 fiber, in comparison, is a little bit stronger, but what's more important, is about 8 times lighter, making it a much more suitable material, though not quite good enough.

Before we dive any deeper into material science, a brief message about units of measurement. The quantity we're interested in is called "Specific strength", or "Tenacity", and is measured traditionally (in the textile industry) with units of N/Tex. The awkard looking unit of GPa-cc/g, which is used elsewhere, is identical to N/Tex. For the full story, see Specific Strength in Yuris.

In the chart below, we track the state of the art in advanced materials. The diagonal line is a "reference curve" that depicts a 50% yearly improvement in the specific strength of materials, starting off at what is available today (2005). This reference curve is not a prediction - it is simply something to compare with. As far as material properties go, this is an extremely fast growth curve. Since Carbon Nanotubes are a new class of materials, we do not expect real-life results to follow this smooth gradual curve, but rather advance in larger steps. With a theoretical limit of about 200 GPa-cc/g, the potential of CNTs exceeds our goal, and just like early metals or plastics, the initial improvement in material properties will be very fast.

In the next few years, we will have a more complete picture of whether CNT materials were able to advance at a 50% yearly rate, and whether we encounter fundamental roadblocks that will prevent further advances.

In addition to the reference curve, we plot the following types of data points:

  • In Blue, we show numbers measured at the Elevator:2010 competition.
  • In Red, we show spec-sheet data for commercial off-the-shelf products.
  • In Purple, we show published measurements and analysis results.
  • In Green, we show Space Elevator goals.

New!!! Two recent data points, #10 and #11!

Data Points

The plot and table below are auto generated at www.spaceward.org/elevator-howClose. When I figure out how to do JavaScript in MediaWiki, I'll add this functionality here. (or, if we can create the image on the server side an image-creation server-side extension, that will be good too, can be done at time of page write rather than page read).

TetherDataPlot.jpg


TetherDataTable.jpg

Power Beaming

This is the second hurdle. Up until recently, we've been requiring a vary powerful (yet not very intense laser) - 30 feet across, several MegaWatts strong - two orders of magnitude larger than any other continuously operating laser in existence.

That by itself was not an insurmountable obstacle - it is quite common for new projects to be "by far larger than anything that preceeded them" - as long as they are not revolutionary in principle, in the grand scheme of things, we do not consider that "Hard". (Remember we're talking here about building a Space Elevator!)

Based on more recent work, specifically the proposal for a Solar Augmented Climber, it seems that the requirements on the power beaming system have been reduced quite dramatically, both in terms of the power level necessary, and what's more important, in terms of the required beam quality.

With this news set of assumptions, we can actually compose the beam from multiple smaller beams. This is very helpful, since recent advances in solid-state laser technology have placed suitable lasers practically within our reach

As for the rest of the power beaming system, great progress has been made in the Space Elevator power beaming challenge ([[1]]) over the last several years in demonstrating these technologies.

Personal tools